Cat7/Cat6a Field Termination Plug VCELINK

Good product, if not a bit pricey. Excellent build quality and very easy to use. I had to cut an existing ethernet cable and these connectors allowed me to use the existing install without having to purchase a crimping tool. Good for its purpose. Would buy again if needed.

I needed to install these connectors on an underground Cat5 cable I had run from my home to an outbuilding as I wanted to set up a bridge router in the outbuilding. The connectors fit perfectly on the cable. I used the T568B wiring configuration and got a perfect test signal.

Good quality, quick to fit with only wire stripers/ cutter required.

The Ethernet cable coming thru the concrete block wall from the Frontier Fiber Moca box was not only a Cat5, but it was also damaged & if bumped, would stop passing a signal to the router on the inside. Instead of just making the hole in the concrete wall large enough (or a new one) for a new patch cable with ends already attached (I'm in a rental), i used a Cat 7 patch cable i already had that was also twice as long as the one ran by Frontier. I cut off one of the male connectors & ran the bare end thru the current hole in the wall from the outside in to where the router is located. Using a regular coax stripper, i was able to remove the outer cover of the ethernet cable without disturbing the internal wires, removed outer foil insulation of each twisted pair, separated them & put them in their color coordinated slots, trimmed the excess wire from the terminal, inserted it the slot on the connector, closed it, screwed on the end cap, plugged one end in the "in" outlet on the router & the other in the "out" outlet on the moca box outside & crossed my fingers (dont have tester). By the time i got back inside, the router was showing it had an internet connection. Ran several speed tests from several different sources on my hard wired pc, including Frontier & they were actually a tad faster than before. Now i've got a much longer cable to better place the router, a stable, fast connection & of course going from Cat 5 to Cat 7, more bandwidth! Being my first time doing this, i was a bit nervous & it took more time to line up the individual wires but i printed out screen shots from the product video showing where each wire goes since the instructions arent really helpful & didnt have to redo a single wire! Very happy with the product & the results...

Identique à la photo, simple à utiliser, dommage il n'y a pas de notice pour le montage mais sur internet on trouve comment faire. Franchement je recommande les connecteurs pour un montage seul. Pour l'instant il fonctionne bien j'attends de voir dans la durée.

Más fácil imposible: pelas el cable, pones cada color dónde corresponde, aprietas y cierras...

This plug is built well but it's a fiddle and took several attempts to get all wires working. You will need a tester for sure. It took me significantly longer than a bog standard plug.

Nice and solid connector.

Wurden verbaut und funktionieren einwandfrei bis jetzt, auch für Laien machbar !

I had to redo wiring 6 times. Seems Cat7 UTP wires were too thick for this connector.

Kit composé de plusieurs éléments afin de pouvoir réaliser une connexion réseau filaire sans outils. Un mini guide facilite l'assemblage des pièces. Je reste quand même dubitatif sur la performance de cette prise car on est en Cat7 ce qui exige une connexion sans faille et avec le minimum de contacts intermédiaires. Or cette prise a une plaquette intermédiaire qui est source de mauvais contacts et autres interférences. => Photo (2) Ce n'est pas une prise à usage professionnel mais pourra rendre des services dans certaines situations. Prix : 14 € le lot de 2 prises

Connecteur RJ45 Cat7 sans Outil Utilisé pour réaliser une liaison box-décodeur avec un câble cat 7, il est facile à câbler avec les instructions de montage, il faut cependant faire attention à être soigneux dans la coupure des brins une fois mis en place pour ne pas créer des courts-circuits entre les brins qui sont sur deux "étages". Connecteur facile à installer car sans outil et avec un repérage efficace.

Die VCELINK - Stecker ersetzen bei mir die Stecker eines anderen Herstellers an einem 20m Kabel, welches ich durch meine Wohnung gelegt habe. Die Stecker sind aus Metall gefertigt und fühlen sich sehr wertig an. Der Anschluss ging recht einfach von der Hand. im Stecker finden sich die Belegungsmuster sowohl für Typ A als auch Typ B wieder. Ob der Stecker 10Gbit fähig ist konnte ich mangels entsprechender Hardware nicht testen, 1Gbit funktionierte aber ohne Probleme.